Filter
Top Products
Liebert iCOM Control—Firmware Version XP1.00.010.STD
42
Figure 42 Liebert XDP Service Menu screen
4.10 Liebert iCOM Service Menu Screens
Service menus allow customized settings for site operations. Service Menu screens employ a coding
that begins with “S” and is followed by parameters and information, such as settings. Gaining access
to most Service Menus requires entering a password; the Service Menu password is 5010; see
4.3.3 -
Entering the Password for assistance.
The Liebert iCOM control firmware is being updated constantly. As a result, the Service Menu
parameters in this manual may be slightly different from what is shown on a cooling unit’s display.
Check
www.liebert.com for the latest Liebert iCOM user manual updates.
Figure 43 Setpoints screen
SERVICE MENUS
to select parameter
to change level
to open requested menu
ESC
to unselect
to navigate
+
WELLNESS
SET
ALARMS
SERVICE
+/-
NETWORK
SET
UP
XDIO
°C / °F
% RH
SET
SETPOINTS
to confirm
for next/previous unit
then
to select parameter
to change parameter
PASSWORD (Actual Level 0)
Min Room Temperature Setpoint
Temperature Control Type
Temperature Proportional Band
Temperature Integration Tiime
Temperature Derivative
Dewpoint Margin
Minimum Control Point
Min Percent Cooling Setpoint
S101
S102
S103
S104
S105
S106
S107
S108
S109
S110
S111
????
60.0°F
Intelligent
7.0°F
min
sec
4.0°F
50.0°F
10%
UNIT 01