Filter
Top Products
© 2007 by Stephen Beck V1.0 Page 15 of 19 Use at your Own Risk
Re
ReRe
Re-
--
-install the PCB:
install the PCB:install the PCB:
install the PCB:
1. Installation is the reverse order of removal
2. Tuck the right hand side of the PCB (the one you marked, right ?) into the slot on the right hand side of the
white plastic tub. (Fig 20)
3. GENTLY press the left side of the PCB into the top and bottom clips till they snap closed, securing the PCB
in place. (Figs. 21 & 22)
4. Re-attach the wire connectors to the PCB – they should naturally fall back into the proper place to connect
back, and match your markings drawings you made when you took them off. Push the wires back into the
chases alongside the PCB. (Fig 23)
Fig. 20
© 2007 Stephen Beck
© 2007 Stephen Beck
Fig. 21
© 2007 Stephen Beck
Fig. 22
© 2007 Stephen Beck
Fig. 23