Filter
Top Products
19
SECTION 3 - OPERATION
I. DESCRIPTION OF CONTROLS – USER INTERFACE
The PS360G oven control performs a variety of functions, including
Temperature control
Belt speed control
Upper/lower blower speed setting
Energy management
Oven diagnostics and system testing
Conveyor speed calibration (Service use only)
The oven control will have power delivered to it and initialize when the oven is connected to the power supply.
Upon initialization, the control will briefly display its “WOW OVEN” splash screen, then proceed to OFF mode.
A. Control Keys
X
X
X
I/O
BELT
X
“ON/OFF” key:
Quick press brings oven to active, “ON” mode.
Press and hold will put oven into “OFF” mode. If temp is over 200F the blowers will
remain on until the oven temp drops below 200F.
“TEMPERATURE” key:
Quick press displays actual temperature.
Press and hold until display flashes. Allows change to set temperature.
X
“BELT” Key:
Quick press displays alternate front and back belt speeds
Press and hold until display flashes. Allows change to belt speed.
“UP/DOWN” keys:
Press up or down to change number values or change parameter.
”TOOLS” Key:
Press (when off) to enter “Setup” or “test” screens
X
“CANCEL” Key:
Quick press cancels last action and returns to last screen or operation.
Press and hold to shut oven off.
BELT
”RETURN” Key:
Quick press stars oven from off mode.
Enters and saves changed parameter value.