Filter
Top Products
21
C. Adjusting the Belt Time
To adjust the belt time, press and hold the
X
button until the belt time display flashes. Press the or
button until the desired belt time is displayed. Press the
BELT
button to set and save the new time value.
If the
BELT
button is not pressed, the new time will be present only until the oven is turned OFF. The previously
used set
temperature will appear when the oven is turned ON again.
D. Turning the Oven Off
To turn the oven OFF, press and hold the
X
I/O
button. If the oven is below 200°Fthe display will show “WOW
OVEN” screen. If the oven is above 200°F, the display will show “COOL DOWN” and the blowers will run at a
preset cool down speed until the oven temperature fails below 200° at which point the oven will go to the OFF
mode. In the OFF mode, the screen will display the “WOW OVEN” screen for a one minute period after which
the screen backlight will shut off. The oven will stay in this condition until it is started again, with no outputs
energized.
III. OTHER ADJUSTMENTS (Manager Mode)
A. Changing Baking Blower Speeds (Run Mode)
To change the upper or lower blower speeds without turning the oven OFF.
1. Enter the BLOWER CONFIGURATION Screen. Press and hold
key until “PASSWORD” appears on
the screen. Press
and
BELT
. The screen should appear as below.
2. Press
until UPPER HIGH HZ is flashing. Press
BELT
to change UPPER HIGH HZ. Press or
to display the desired value. Press
BELT
to accept the new value. Follow same procedure for the
LOWER HIGH HZ value if required.
MINIMUM HZ VALUE: 45 Hz
MAXIMUM HZ VALUE: 90 Hz
BLOWER CONFIGURATION
UPPER HIGH HZ: 70
LOWER HIGH HZ: 100
ENERGY MODE: YES