Filter
Top Products
With the aid of the following guide, faults in the performance of the appliance,
some of which may result from incorrect operation can be put right without
contacting the Service Department.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
,
Repairs should only be carried out by a suitably qualified and trained
person in strict accordance with current local and national safety regulations.
Unauthorised or incorrect repairs could cause personal injury or damage to the
appliance.
Technical problems
Problem Possible cause Remedy
The display remains
dark and the Standby
indicator light is not
flashing after the
dishwasher has been
switched on with the
On/Off sensor K.
The appliance is not
plugged in.
Insert the plug and switch
on at the socket.
The fuse has tripped. Reset or replace the fuse.
(Minimum fuse rating -
see data plate).
The dishwasher stops
during a programme.
The fuse has tripped. Reset or replace the fuse.
(Minimum fuse rating -
see data plate).
Problem solving guide
47