Filter
Top Products
Problem Possible cause Remedy
Dishes, cutlery and
glasses are not dry
or are flecked.
The amount of rinse aid
may be insufficient, or the
rinse aid reservoir empty.
Replenish the reservoir,
increase the dosage or
change the brand of rinse aid.
See "Before using for the first
time".
Crockery was taken out of
the cabinet too soon.
Leave it in for longer. See
Operation.
Combi tabs have been
used which have impaired
drying performance.
Set the Detergent type to
Normal, and fill the rinse aid
reservoir with rinse aid. (See
"Settings menu J, Detergent
type".)
The dishwasher has been
set for 2 in 1 or Combi
tabs, even though this type
of detergent has not been
used.
Set the Detergent type for the
product being used. (see
"Settings menu J, Detergent
type".)
White residue is
visible on cutlery
and crockery,
clouding occurs
on glassware; film
can be wiped off.
Not enough rinse aid was
used.
Reduce the dosage (see
"Settings menu J, Rinse aid").
There is no salt in the salt
reservoir.
Fill the salt reservoir. See
"Before using for the first time -
Filling the salt reservoir".
An unsuitable combination
detergent has been used.
Change your detergent. Use a
standard liquid, tablet or
powder detergent.
There is a fault with the
automatic water softening
system.
Call the Service Department.
Problem solving guide
55