Filter
Top Products
Display
The display is used to select the
following:
–
the programme
–
extras
–
the delay start time
–
the Settings menu
!
– information
During a programme, the display
shows the following:
– the name of the programme
– the current time of day
– the stage the programme is at
– the estimated time left for the
programme to run
– any relevant fault messages and
notes
To save energy the display goes out
after 10 minutes if you do not touch
any sensors during this time.
Touching any sensor will switch the
display back on again.
!
A dot in the display next to a selector
sensor indicates that a function can be
selected with that sensor. The relevant
sensor lights up.
n
The arrows on the right of the display
indicate that more options or more text
are available which can be displayed
by touching the relevant illuminated
selector sensor.
------
A dotted line will appear after the last
option available.
OK
The OK function is used to confirm a
message or setting, and also to move
to the next menu or to another menu
level.
(
A tick will appear beside the option
which is currently selected.
The Settings menu ! is used to alter
the dishwasher's electronics to suit
different requirements. See Settings
menu for more details.
Guide to the appliance
7