Filter
Top Products
Showroom programme
The programme is for display use
only.
The dishwasher is fitted with various
demonstration programmes for
showroom use.
The
Demo mode and Demo mode in
continuous loop
programmes
demonstrate the operation and
functions of the dishwasher:
–
Demo mode:
This programme is started by
pressing a sensor. It will run through
once and then has to be started
again.
–
Demo mode in continuous loop:
This programme will begin as soon
as you switch it on and then will play
in a continuous loop until you switch
it off.
–
Demo with sound:
This programme activates the pumps
to demonstrate the sound of the
dishwasher.
–
Demo programme::
Using for the first time is disabled in
the display.
–
Drying plus demo:
The door will open automatically.
To switch Demo mode on
^
Select the option you want and
confirm this with
OK.
^
Confirm the following questions with
OK.
^
If necessary, touch any sensor to
start the Demo mode you have
selected.
^
To cancel the Demo programme,
touch any sensor again and confirm
with it with
OK.
To switch Demo mode off
^ Select
Off and confirm with OK.
^ Confirm the question
Switch demo
mode off?
with OK.
Factory default
If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings.
^
Confirm the question
Reset factory
default settings?
with OK.
^
Confirm
All settings reset with OK.
To close the Settings ! menu
Touch the Clear sensor U to come out
of the Settings
! menu and return to the
main menu.
Settings menu !
81