Filter
Top Products
Warning and Safety instructions
13
Correct installation
The dishwasher must be install
ed and connected in compliance
with the installation diagram supplied.
T
ake care, both before and during installation of the dish‐
washer, not to cut yourself on the metal parts. Danger of in‐
jury. Wear protective gloves.
The dishwasher must be corr
ectly aligned to ensure problem-free
operation.
In or
der to ensure stability, built-under and integrated dishwash‐
ers must only be installed under a continuous worktop which is se‐
cured to adjacent cabinetry.
If
you want to convert your freestanding dishwasher to a built-un‐
der ("U") model, you will need to order the appropriate conversion
kit. If you remove the existing plinth, you must replace it with a U-
model plinth. This is necessary to avoid the risk of injury caused by
protruding metal parts.
The door spring
s must be adjusted equally on both sides. They
are correctly adjusted when the door remains stationary when left
half open (approx. 45° opening angle). It is also important that the
door cannot fall open.
The appliance may only be used with correctly adjusted door
springs.