Filter
Top Products
Programme options
53
Factory default
If you have altered any settings from
the fact
ory default, you can re-set them
back to the factory default settings.
Open the door
.
Switch the dishwasher off with the
butt
on, if it is switched on.
P
ress the programme selector button
in, and whilst holding it in switch
the dishwasher on using the but‐
ton.
Keep the programme selector button
pressed in for at least four sec‐
onds until the lower right hand pro‐
gramme indicator comes on.
If this does not happen, start the proce‐
dur
e from the beginning again.
P
ress the
Short butt
on 19 times.
The Short
indicator will do 1 long flash
and 9 short flashes at intervals.
The flashing sequence in the display in‐
dicat
es whether a setting has been
changed from its factory default.
– : All setting
s are set to factory de‐
fault settings.
– : A
t least one setting has been
changed.
T
o reset the dishwasher to the factory
default settings, press the pro‐
gramme selector button .
The setting is now stored in memory.
Switch the dishwasher off with the
butt
on.