Filter
Top Products
Programme options
50
Adjust Sensor wash
You can adjust the Sensor wash pr
o‐
gramme so that it will remove stubborn
soiling in a lightly soiled load.
Open the door
.
Switch the dishwasher off with the
butt
on, if it is switched on.
P
ress the programme selector button
in, and whilst holding it in switch
the dishwasher on using the but‐
ton.
Keep the programme selector button
pressed in for at least four sec‐
onds until the lower right hand pro‐
gramme indicator comes on.
If this does not happen, start the proce‐
dur
e from the beginning again.
P
ress the
Short butt
on 5 times.
The Short
indicator will flash rapidly 5
times at intervals.
The flashing sequence in the display in‐
dicat
es whether Adjust sensor wash is
activated or not.
– : "Ad
just sensor wash" activated
– : "Adjust sensor wash" deactiva‐
t
ed
P
ress the programme selector button
if you wish to change the setting.
The setting is now stored in memory.
Switch the dishwasher off with the
butt
on.