Filter
Top Products
Before using for the first time
27
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best r
esults.
The rinse aid dosage is set in stages
fr
om 0 to 6. It is set to 3 at the factory.
This is the recommended setting.
If the "Adjust Sensor wash" programme
function (depending on model) has
been activat
ed, the amount of rinse aid
dispensed in the
Sensor wash p
ro‐
gramme can be higher than that set.
If spots appear on crockery and glass‐
war
e:
Incr
ease the rinse aid dosage.
If clouding or smearing appears on
cr
ockery and glassware:
Decr
ease the rinse aid dosage.
Switch the dishwasher off with the
butt
on, if it is switched on.
P
ress the programme selector button
in, and whilst holding it in switch
the dishwasher on using the but‐
ton.
Keep the programme selector button
pressed in for at least four sec‐
onds until the lower right hand pro‐
gramme indicator light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
P
ress the
Short butt
on 3 times.
The Short
indicator will flash rapidly 3
times at intervals.
The dosage set will show in the display
aft
er the symbol.
The flashing sequence
will appear in
the display.
This indicates the factory default setting
3.
Use the pr
ogramme selector button
to select the setting required.
Each press of the button moves you
up a level.
The setting is now stored in memory.
Switch the dishwasher off with the
butt
on.