Filter
Top Products
Before using for the first time
23
Adding salt
Before filling the salt reservoir with
dishwasher salt for the first time, you
must fill it with appr
ox. 1 litre of wa‐
ter to enable the salt to dissolve.
Once the dishwasher has been used,
ther
e is always sufficient water in the
reservoir.
Remo
ve the lower basket and un‐
screw the salt reservoir cap.
Water or saline solution will run out
of the r
eservoir when the cap is re‐
moved.
It should therefore only be removed
in
order to refill the salt reservoir.
Fi
ll the reservoir with approx. 1 litre of
water (first use only).
Place the funnel provided over the
salt reservoir and carefully fill with
salt until the reservoir is full. The salt
reservoir holds approx. 1 kg of salt
depending on the brand used.
Cle
an any excess salt from around
the reservoir opening and then screw
the cap on again firmly.
Immediat
ely after filling the salt reser‐
voir, run the
Quick wash pr
ogramme
with the
Short pr
ogramme option se‐
lected and without any crockery in
the dishwasher, to remove any traces
of salt from the cabinet.