Filter
Top Products
Modes of operation
15
Con@ctivity 2.0 function
Automatic control
The cooker hood has a communication
facility which enables the automatic
operation of the cooker hood
depending on the operational state of
the hob.
To make use of the communication
facility the hob must be fitted with a
Con@ctivity 2.0 stick .
Refer to the installation instructions for
the Con@ctivity 2.0 stick to check
whether it is compatible with your hob.
To use the Con@ctivity 2.0 function, a
wireless connection must be
established between the hob and the
cooker hood (see "Activating
Con@ctivity 2.0").
The hob transmits information about its
operational status via a radio signal to
the cooker hood.
– When the hob is switched on, the
hob lighting comes on independently
and the fan also switches on and the
deflector plate comes out.
– During cooking the cooker hood
automatically sets the power level
according to the number of cooking
zones in operation and their power
levels.
– After the hob has been switched off,
the cooker hood fan and the hob
lighting will switch off and the
deflector plate will go back in.
See "Operation" for detailed
information about this function.