Filter
Top Products
Signing on/off the remote control
58
If the connection has been lost between
the remote control and the cooker
hood, they must be signed on again. To
do this, the remote control function on
the cooker hood and the remote control
must be signed off first of all.
Signing on/off is carried out with the
deflector plate retracted.
Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
Signing on and off must be done at the
same time on the cooker hood and the
remote control. Signing on/off mode
has to be accessed on the cooker hood
first, then on the remote control.
To access Signing on/off mode on
the cooker hood
Press the run-on option control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
Then press in turn,
– the "" control,
– then the "" control,
– then the lighting control .
Then access the Signing on/off mode
on the remote control immediately.
To access Signing on/off mode on
the remote control
Press both arrow controls at the
same time and hold for about 5
seconds until the remote control LED
flashes.
Press the lighting control .
To sign off
In Signing on/off mode press the ""
control on the cooker hood and then
on the remote control.
The remote control LED will flash
steadily.
After approx. 10 seconds the remote
control LED will flash on and off twice
with a longer interval between the
flashes. The remote control has now
been signed off. The LED will go out
after a short while.