Filter
Top Products
Signing on/off the remote control
59
Confirm the signing off procedure by
pressing the run-on option control
515 on the cooker hood. All
indicators will go out.
Please bear in mind that disabling the
signal will also disable any
Con@ctivity 2.0 function and this will
have to be activated again.
To start the signing on procedure
In Signing on/off mode press the ""
control on the cooker hood first and
then on the remote control.
The search for a signal will commence.
The remote control LED will flash
steadily.
After approx. 30 seconds the remote
control LED will flash on and off 4 times
at short intervals. The connection has
been established. The LED will go out
after a short while.
Confirm signing on with the cooker
hood run-on option control 515. All
indicator lights will go out.
The remote control can now be used.
If you do not confirm your selection
within 4 minutes, activation will not take
place.
To cancel the signing on procedure
If it is not possible to sign on the
procedure can be cancelled by
pressing the run-on option control
515 on the cooker hood and on the
remote control.
The signing on procedure must then
be repeated. To do this the cooker
hood and the remote control must
first be signed off.