Filter
Top Products
Cleaning and care
34
Remote control
Cleaning the remote control
Only clean the surface with a damp
cloth. Do not use too much water to
avoid moisture penetrating the
casing.
Changing the battery
Use only the type of battery listed.
Do not use rechargeable batteries.
The remote control requires one 3 V CR
2032 battery.
The battery must be changed if cooker
hood functions can no longer be
selected using the remote control or if
the LED light on the remote control
does not light up, or only lights up
dimly when a control is pressed.
Cooker hood functions can still be
selected using the cooker hood
controls.
Use a screwdriver to loosen the two
screws on the back and remove the
cover.
Remove the old battery and replace
with a new one, making sure the
polarity is correct.
Replace the cover.
Dispose of the old battery
responsibly.