Miele 09 885 260 Ventilation Hood User Manual


 
Installation
37
a
Extraction, recirculation with
conversion kit DUU 150.
b
The wall unit carcase needs to be 38
mm shorter than the wall unit door.
c
Installation is also possible in a 600
mm wide unit. In this case the unit
door must open upwards to allow
access to the grease filters. This
also applies for adjacent units.
d
The ducting can also be connected
at the back.
e
After installation the wall unit can be
fitted with an interim panel. If this is
done make sure that the slots for the
grease filters and, for recirculation
mode, the charcoal filters remain
easily accessible.
f
Alternatively the wall unit can be
fitted with side sections.
The height of the wall unit and cut-out
dimensions must take account of any
accessories fitted, e.g. silencer, DSM
module.