Filter
Top Products
Activating Con@ctivity 2.0
56
Installing the Con@ctivity 2.0
Stick
In order to use the Con@ctivity 2.0
function, the hob must first be fitted
with the Con@ctivity 2.0 Stick.
Please read the separate installation
instructions supplied with the
Con@ctivity 2.0 Stick.
Activating Con@ctivity 2.0
Wireless connection must be activated
between the hob and the cooker hood
before the Con@ctivity 2.0 function can
be used.
Both appliances must be installed and
operational.
Wireless connection must be activated
on the cooker hood and the hob at the
same time. Activation on the cooker
hood is described below.
Activation on the hob is described in
the relevant Operating and installation
instructions. Please refer to the
Operating instructions before starting.
Activate the cooker hood first, then the
hob.
Activating the cooker hood
Signing on/off is carried out with the
deflector plate retracted.
Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
The hob and cooker hood must be
switched off.
Press the run-on option control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
Then press in turn,
– the "" control,
– then the "" control,
– then the lighting control .
If the remote control is already
activated, 2 and 3 will light up
constantly. If there is no wireless
connection 2 and 3 will flash at the
same time.
To activate Con@ctivity 2.0, press the
"" control.
The search for a signal will start.
Meanwhile, start activating the hob.