Filter
Top Products
Installation
47
Tighten the four fixing screws from
below.
When fitting a 900 mm wide cooker
hood in a 600 mm wide wall unit,
insert the two rear screws at this
stage.
If the wall unit has side sections, you
will also need to secure it to the base
on either side.
Reconnect the cooker hood to the
electricity supply.
The motor will switch on again.
Press the On/Off control on the
cooker hood or the "" control on
the remote control repeatedly until
the fan switches off.
The motor will switch off. The deflector
plate goes back in.