Filter
Top Products
,
The appliance must be built in
before it can be used. Otherwise it
poses an electric shock hazard.
^
Press and release the selectors, if
they are pushed in when the oven is
delivered.
Setting the time of day
^
Connect the appliance to the mains
electricity supply.
12:00 and the + symbol will flash in
the display until the current time of
day is set.
^
Turn the time selector to set the time
of day.
^
Touch the OK sensor or + to confirm.
The set time is now registered.
You can change between 24-hour and
12-hour format (see "Changing
settings").
Altering the time of day
^
Touch the + sensor.
The + symbol flashes in the display
for a few seconds.
^
While the + symbol is flashing, use
the time selector to alter the time of
day.
^ Touch the OK sensor or + to confirm,
otherwise the time will revert to the
original time.
Time of day display not visible
If the appliance is not used for approx.
10 minutes, the time of day display
switches off and runs in the
background. The display goes dark.
The appliance is switched off and must
be switched back on using the "On/Off"
sensor K before it can be used.
You can deactivate this setting if you
want the time of day to be visible at all
times (see "Changing settings").
Time of day display
33