Filter
Top Products
Keeping warm function
The keeping warm function will switch
on automatically at 80 W for a maximum
of 15 minutes approx. 2 minutes after
the end of a cooking programme which
has used at least 450 W, providing the
door remains closed and no sensors
are touched.
h,80WandH:H will light up in the
display.
Opening the door or operating one of
the sensors or selectors while the
keeping warm function is in progress
cancels the function.
The keeping warm function cannot be
set as a separate function.
You can deactivate this function (see
"Changing settings").
Quick start (programmable)
Touching "Start" c is sufficient to set
the appliance operating on maximum
power.
Three set durations are stored in
memory:
^
30 secs: Touch "Start" c once
^
1 min: Touch "Start" c twice
^
2 min: Touch "Start" c three times
Touching "Start" c four times in
succession will bring back the first
stored duration and so on.
The cooking duration can be increased
by touching "Start" during operation;
each time "Start" is pressed, the
cooking duration is increased by
another 30 seconds.
Programming durations
To alter the set durations:
^
Touch "Start" c to select the duration
you want to reprogramme (touch
once, twice or three times) and keep
your finger on the c sensor.
^
Alter the duration with the time
selector (to max 15 minutes).
The altered programme runs when
you take your finger off the "Start" c
sensor.
An interruption to the power supply
will cancel any altered programmed
durations, and they will need to be
entered again.
Operation
37