Miele 10 014 160 Appliance Trim Kit User Manual


 
IMPORTANT SAFETY INSTRUCTIONS
14
Proper installation
The dishwasher must be install
ed and connected in compliance
with the installation plan.
Be car
eful when installing the dishwasher. Wear protective
gloves to avoid injury on any sharp metal components.
The dishwasher must be corr
ectly aligned horizontally to ensure
problem-free operation.
In order to ensure stability, built-under and integrated dishwash‐
ers must only be installed under a continuous counter which is se‐
cured to adjacent cabinetry.
If you want to convert your freestanding dishwasher to a built-un‐
der ("U") model, you will need to order the appropriate conversion
kit. If you remove the existing toe-kick, you must replace it with a U-
model plinth. This is necessary to avoid the risk of injury caused by
protruding metal parts.
The door spring
s must be adjusted equally on both sides. They
are correctly adjusted when the door remains stationary when left
half open (approx. 45° opening angle). It is also important that the
door cannot fall open.
The appliance may only be used with correctly adjusted door
springs.
Proper use
Do not use sol
vents in the dishwasher. Danger of explosion!
Do not inh
ale or ingest powder detergent. Dishwasher detergents
contain irritant or corrosive ingredients which can cause burning in
the nose, mouth, and throat if swallowed, or inhibit breathing. Seek
medical attention immediately if detergent has been swallowed or in‐
haled.
A
void leaving the door open unnecessarily as someone could trip
over it and be injured by it.