Filter
Top Products
Options
52
EcoStart
The FlexiTimer
function allows you to
take advantage of time variable econo‐
my rates of electricity. Before you can
use this option, you must set up to
three electricity rate time zones (see
"Settings menu - EcoStart").
You then set the latest time at which the
program selected should end.
The dishwasher will start automatically
in the cheapest rate zone within the
time set.
Use the arr
ow buttons to set the
hour and confirm with
OK.
The hour will be saved and the minute
number block will
be highlighted.
Use the arr
ow sensors to set the
minutes and confirm with
OK.
The estimated start time for the pro‐
gr
am selected will appear in the display.
The indicator light will come on.
Close the door within four seconds.
The selected program will start auto‐
matically during the most cost effective
time zone
. It will finish at the latest by
the set finish time.
Changing or deleting set times
You can change the set times or the
pr
ogram before the start time in the dis‐
play is reached.
Open the doo
r.
P
ress the button.
Use the arr
ow buttons to select
the setting you want to change and
confirm with
OK.
Use the arr
ow buttons to select
the Change or Delete function and
confirm with
OK.
After confirming the Change function,
you can change the set time.
After confirming the Delete function, the
pr
ogram duration will appear in the dis‐
play for the selected program.
The indicator light will go out and the
indicator light for the selected program
will come on.
Start the program by closing the
door.
If you open the door for more than
four seco
nds before the start time is
reached, the message Continue with OK
appears in the display. Press the
OK
butt
on and close the door within four
seconds to restart the FlexiTimer.