Filter
Top Products
Operation
46
Energy management
To save energy, the dishwasher will
switch off aut
omatically 10 minutes af‐
ter the last time a button has been
pressed or after the end of the program
(see "Settings menu - Optimize stand‐
by").
P
ress the button to switch the
dishwasher back on.
The dishwasher will not switch off
while a pr
ogram or the FlexiTimer is
running or if there is a fault.
At the end of the program
At the end of a program, the Optical In‐
t
erface will be visible flashing slowly
with the door shut. The buzzer might al‐
so be sounding.
The program has finished when End
appears in the display and the door has
opened slightly (if applicable).
The drying fan may continue to run for
a few minut
es at the end of the pro‐
gram.
Open the door fully so that the door
catch
rail retracts again.
You can now empty the dishwasher.
The Optical Interface will go out 10 mi‐
nutes after the end of the program if the
door is closed.
I
f you have deactivated the auto‐
matic door opening function (see
"Settings menu - AutoOpen"), but
would still like to open the door at
the end of the program, make sure
that you open the door fully.
Otherwise steam from the dishwash‐
er could damage the edge of the
co
unter because the fan is no longer
running.