Filter
Top Products
Frequently Asked Questions
70
With the help of the following guide, minor faults in the performance of the appli‐
ance, some
of which may result from incorrect operation, can be put right without
contacting Miele Service. This will save time and money.
The following guide may help you to find the reason for a fault, and to correct it.
Y
ou should, however, note the following:
Unauthorized or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances must only be carried out by a suitably
quali
fied and competent person in strict accordance with current local and na‐
tional safety regulations. The manufacturer cannot be held liable for unauthor‐
ized work.
Technical problems
Problem Possible cause and solution
The dishwasher does
n
ot start.
The door is not properly closed.
P
ush the door firmly shut.
The dishwasher is not plugged in.
Inser
t the plug.
The circuit breaker has tripped.
Reset the fuse (see data p
late for the correct fuse
rating).
The dishwasher is not switched on.
T
urn the dishwasher on with the button.
The dishwasher stops
durin
g a program.
The circuit breaker has tripped.
Reset the fuse (see data p
late for the correct fuse
rating).
If
the circuit breaker trips again, contact Miele
Service.
After the program has
star
ted, the Optical In‐
terface is not visible.
The indicator reflector panel was not correctly fitted.
Refit the indicat
or reflector panel correctly (see the
installation plan).