Filter
Top Products
Settings menu
58
Rinse aid
You can adjust the rinse aid dosage for
best r
esults.
The rinse aid dosage is set in stages
from 0 to 6.
It is set to 3 at the factory.
The dosage can turn out to be higher
than the set valu
e due to the automatic
adjustment of the
Automatic p
rogram.
If spots appear on dishware and glass‐
war
e:
– Increase the rinse aid dosage.
If clouding or smearing appears on
dishwar
e and glassware:
– Decrease the rinse aid dosage.
Select the setting you want and con‐
firm your choice with OK.
EcoStart
In order to run your dishwasher in the
most economical way, you can use the
FlexiTimer option t
o take advantage of
your electricity supplier's time variable
rates (see "Options - FlexiTimer with
EcoStart").
With this option selected, your dish‐
washer will start automatically at your
electricity supplier's cheapest rate
times.
To use this option, you must first set up
t
o three electricity rate time zones in
which the dishwasher can start. You
can allocate different priorities to these
time zones. The time with the cheapest
electricity rate will be given Priority 1.
Contact your electric supplier to find
out the times of the cheapest electricity
r
ates.
Once the electricity rate times have
been set, you can use the FlexiTimer
op‐
tion to set the latest finish time required
for each program.
The dishwasher will then start automati‐
cally in the cheapest electricity rate
time and the program will end at the lat‐
est at the finish time set.