Filter
Top Products
Operation
45
Starting a program
The dishwasher can be started only if
the door is closed.
Press the Start sensor button.
The program starts, and the prompt
Dishes can be added appears in the dis‐
play
.
As long as this prompt is showing,
dishware can be added without com‐
promising the wash results.
W
ater in the dishwasher may be
hot. Danger of scalding from water in
the cabinet.
Make sure you open the door very
carefully.
A program should only be canceled
in
the first few minutes, if at all. Oth‐
erwise important program stages
could be omitted.
Time display
The estimated duration of the program
select
ed appears in hours and minutes
in the display before the program be‐
gins. During the program, the time left
until the end of the program is dis‐
played.
Each program stage is indicated by a
symbol:
Pre-wash / Soak
Main wash
Interim rinse
Final rinse
Drying
Finish
The program duration displayed may
var
y with the same program. It is influ‐
enced by, among other things, the wa‐
ter temperature at each intake, the re‐
activation process, the type of deter‐
gent, the amount of dishware, and the
amount of soiling.
When a program is selected for the first
time, the display shows an aver
age
time for a cold water intake.
The times shown in the program over‐
view r
efer to standard test loads and
temperatures.
Each time a program is run, the elec‐
tr
onic module calculates the program
duration required according to the tem‐
perature of the water taken into the
dishwasher and the amount of dish‐
ware.