Filter
Top Products
Frequently Asked Questions
76
General problems
Problem Possible cause and solution
This display is dark. The dishwasher has switched off automatically to
save ener
gy.
T
urn the dishwasher on again using the sensor
button.
The interior lighting
does not switch on
when the door is
opened.
The interior lighting has been switched off.
Switch the lighting back on again (see "Settings
menu - BrilliantLight").
Detergent residue is left
in the dispenser at the
end
of a program.
The dispenser was still damp when detergent was
added.
Mak
e sure the dispenser is dry before adding de‐
tergent.
The dispenser cover
cannot be closed.
Detergent residue is blocking the latch.
Remo
ve the detergent residue.
The inside of the door
and/or the int
erior walls
are wet after a program
has finished.
This is caused by the drying system and does not in‐
dic
ate a fault. The moisture will dissipate after a
while.
Water remains in the
wash cabinet at the end
of a pr
ogram.
Before fixing the fault:
T
urn the dishwasher off using the sensor but‐
ton.
The filter system in the wash cabinet is clogged.
Clean
the filter system (see "Cleaning and care -
Filter system").
The drain pump or non-return valve is blocked.
Clean
the drain pump or the non-return valve (see
"Frequently asked questions").
The drain hose is kinked.
Remove the kink.