Filter
Top Products
Options
53
EcoStart
The FlexiTimer
function allows you to
take advantage of time variable econo‐
my rates of electricity. Before you can
use this option, you must set up to
three electricity rate time zones (see
"Settings menu - EcoStart").
You then set the latest time at which the
program selected should end.
The dishwasher will start automatically
in the cheapest rate zone within the
time set.
Use +/- t
o set the hour and confirm
with OK.
The hour will be saved and the minute
number block will be highlighted.
Use +/- t
o set the minutes and con‐
firm with OK.
The display will switch to the program
menu.
Confirm with Start t
o start the pro‐
gram.
The estimated start time for the pro‐
gram selected will appear in the display.
The
Start indica
tor light will light up to
confirm that the program has started.
The selected program will start auto‐
matically during the most cost effective
time zone
. It will finish at the latest by
the set finish time.
Changing or deleting set times
You can change the set times or the
pr
ogram before the start time in the dis‐
play is reached.
Select the Change option.
The display will switch to the program
menu.
Select the Start at, Finish at, or Flexi-
Timer function.
T
o change the set time, select the de‐
sired time with +/- and confirm with
OK.
T
o delete the set time, select the Re-
set option and confirm the reset time
with OK.
The display will switch to the program
menu.
If you open and close the door again
befor
e the start time is reached, the
message Press Start to continue will ap‐
pear in the display. Press the
Start
sensor butt
on to restart the delay
start.