Miele 10 014 200 Appliance Trim Kit User Manual


 
Electrical connection
86
Installation, repairs and other work
by unqualified persons could be
dange
rous.
Check that the voltage, frequency
and fuse r
ating shown on the data
plate match the household mains
supply.
The power outlet must be accessible
aft
er installation. Do not use an ex‐
tension cord to connect the dish‐
washer to the mains. Danger of over‐
heating! See data plate on the right
side of the door.
A damaged power cord must only be
r
eplaced with a genuine Miele cord
by a Miele service technician.
Grounding instructions
THIS APPLIANCE MUST BE
GROUNDED.
In the event of a malfunction or break‐
down, grounding will reduce the risk of
electric shock by providing a path of
least resistance for the electrical cur‐
rent. This appliance is equipped with a
cord having an equipment grounding
conductor and a grounding plug. The
plug must be plugged into an appropri‐
ate outlet that is installed and grounded
in accordance with all local codes and
ordinances.
Improper connection of the equip‐
ment grounding conductor can result
in electric shock.
Do not modify the plug provided with
the appliance; if it will not fit the out‐
let, have a pr
oper outlet installed by
a qualified electrician.
If there is any question concerning
the pr
oper electrical connection or
grounding of this appliance to the
powersupply, please consult a li‐
censed electrician or call Miele’s
Technical Service Department:
USA: 1-800-999-1360
CDN: 1-800-565-6435
Specifications
The dishwasher comes equipped with a
4 ft (1.2 m)
powercord with a molded
plug for connection to 120 V, 60 Hz,
15 A grounded receptacle.