Filter
Top Products
Settings menu
62
Temperature
You can set whether the temperature
should be displayed in °C/Celsius or °F/
F
ahrenheit.
The factory default setting is °C.
Select the option you want and con‐
firm with OK.
Brightness
There are seven different display bright‐
ness settings.
Select the brightness you want and
confirm this with OK.
Volume
A sequence of buzzer tones will sound
at the end of the pr
ogram or if there is a
fault as long as the buzzer has been ac‐
tivated.
Buzzer in the event of a fault
The buzzer in the event of a fault will
soun
d four times at intervals with a
short pause between each set of tones.
The buzzer which sounds when there
is a fault can
not be deactivated.
Buzzer at the end of a program
The buzzer at the end of a program will
soun
d four times at intervals with a
short pause between each set of tones.
Buzzer tones
The volume of the tone at the end of
the pr
ogram can be selected in seven
stages or switched off.
Select the volume you want using the
Quieter
and Louder options, or turn the
buzzer off.
Confirm with OK.
Night time buzzer tone
You can select a different volume for
the buzz
er at night, or turn it off.
Select the volume you want for the
nig
ht time buzzer using the Quieter
and Louder options, or switch the
night-time buzzer off.
Confirm with OK.