Filter
Top Products
You can programme the amount of
water used for each portion of
espresso, coffee or hot water to suit
your taste and your cups.
With milky drinks you can set the
duration of the steam used for heating
or frothing the milk.
There is a maximum amount of water
which can be programmed for each
type of drink. Water flow stops
automatically when the maximum
amount possible is reached. The
maximum amount possible for that type
of drink will then be saved.
To programme the amount either:
– Press the ., /, - or * button for
3 seconds, or
– Select the PROG. THE AMOUNT
from in the SETTINGS menu.
If there is insufficient water in the
water container, the process will be
stopped and the amount will not be
saved.
Programming the amount
using the ., /, - or * button
Press the ., /, - or * button for at least
3 seconds to programme the amount
for that particular drink.
Setting the portion sizes for
espresso, coffee and hot water
^
Place a cup of the size you wish to
programme the drink for under the
coffee spouts.
^
Press the ., / or - button until
PROG. THE AMOUNT appears in the
display.
Espresso or coffee will be prepared
and SAVE will appear in the display.
^ Press the OK button when the cup
has been filled to the level you want.
The portion size programmed in will
now be dispensed every time that
particular drink is selected.
TIP You can cancel programming the
amount as long as CANCEL is visible in
the display.
Setting the portion sizes
32