Filter
Top Products
Brew unit
Clean the brew unit by hand only
using hot water. Do not use
washing-up liquid.
Please note:
–
The moving parts of the brew unit are
lubricated. Washing-up liquid will
damage the brew unit.
–
Clean the brew unit once a week.
Remove the brew unit and wash by
hand
The brew unit can be removed for
cleaning. To do this:
^ Pull out the two flaps on the right
hand side of the coffee machine.
Turn the flaps 90° clockwise. Open
the door.
^
Press the button under the handle of
the brew unit a and whilst doing so
turn the handle clockwise b.
^
Carefully pull the brew unit out of the
coffee machine.
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (see
"Problem solving guide").
When the brew unit has been pulled
out, do not alter the position of the
brew unit handle. This would
displace the brew unit and it would
not fit back into the coffee machine.
^
Clean the brew unit by hand under
hot running water without using
washing-up liquid.
^ Wipe any remaining coffee off the
filters. One filter is located in the
funnel a and the other to the left of
the funnel b.
^
Dry the funnel area a to prevent
ground coffee sticking to it.
^
Clean the inside of the coffee
machine. Use your vacuum cleaner
to remove dry coffee grounds.
Cleaning and care
52