Filter
Top Products
Setting the duration of the steam
used for hot milk and milk froth
The duration of steam used is the same
for heating milk and for frothing milk.
^
Place a container with sufficient milk
beside the coffee machine on the
right hand side. Insert the milk tube in
the container.
^
Turn the cappuccinatore dial to the z
or J position.
^
Place the cup you wish to
programme the steam duration for
under the cappuccinatore.
^ Press the * button until PROG. THE
AMOUNT appears in the display.
Hot milk or milk froth will be prepared
and SAVE will appear in the display.
^ Press the OK button when the cup
has been filled to the level you want.
Milk will be heated or frothed with
steam for the duration you have
programmed in every time hot milk or
milk froth is selected.
TIP You can cancel programming the
amount as long as CANCEL is visible in
the display.
Selecting the PROG. THE
AMOUNT option in the
SETTINGS menu
^
Press the OK button for two seconds.
SETTINGS
r PROG. THE AMOUNT s
^
Turn the rotary control until PROG.
THE AMOUNT appears in the
display.
Press the OK button.
^
Turn the rotary control until the drink
for which you want to set the portion
size appears in the display.
Press the OK button.
^ Turn the rotary control until START
appears in the display. Press the OK
button.
Preparation will begin and SAVE will
appear in the display.
^ Press the OK button when the cup
has been filled to the level you want.
The portion size programmed in will
now be dispensed every time that
particular drink is selected.
Setting the portion sizes
33