Filter
Top Products
Message Possible cause and remedy
The following
appears in the
display, even
though the drip tray
is empty:
EMPTY THE
DRIP TRAY
The drip tray is not sitting correctly.
^
Push the drip tray into the coffee machine until it clicks
into position.
or
The metal contact discs are dirty.
^
Clean the discs and then dry them thoroughly.
or
^
The drip tray sensing mechanism is not working.
^
Switch the coffee machine off and then back on again
using the master switch.
If the fault message appears in the display again,
^ Call the Service Department.
You can hear the
noise of the pump
and the following
appears in the
display:
FILL WATER
CONTAINER AND
PLACE IN THE
MACHINE
The coffee machine is attempting to draw in water although
the water container is empty. Air is present in the pipework.
^ Fill the water container with cold tap water.
SYSTEM FILLING UP - START will appear in the display.
^
Then press the OK button.
Dispensing stops
and the following
appears in the
display:
PROCESS STOPPED
WATER CONT. EMPTY
There is not enough water in the water container.
^
Fill the water container with fresh tap water and replace it
in the machine.
^
Then press the OK button.
The following message appears in the display: CONTINUE
DISPENSING - YESB.
^
Press the OK button to continue dispensing,
or select NO to cancel preparation.
Problem solving guide
59