Filter
Top Products
The following notes should help you get
to know your coffee machine before
starting to use it.
Controls
This machine has sensor controls which
react to touch. To operate the machine,
you only need to touch the relevant
sensor. There are five sensors:
s On/Off sensor: For switching the
machine on or off
< > Left/right arrows:
For scrolling through the various
programme options
OK sensor: For confirming the
selection of a programme option
and for saving a setting
- Hot water sensor
Display
Espresso
q r HI J L n m C
The following symbols come up in the
display in the main menu:
q Espresso
r Coffee
H Cappuccino
I Latte Macchiato
J Hot milk
L Milk froth
n User profile for up to 9 different
users
G Maintenance programme for milk
pipework, brew unit, descaling,
rinsing
C Settings: Customising your
machine
^
The arrow sensors are used to select
a programme option in the display.
Touch the OK sensor when the option
you want appears highlighted in the
display.
Before using for the first time
The machine must be correctly
installed and connected (see
"Electrical connection", "Plumbing"
and "Installation") before it is used
for the first time. It must then be
cleaned (see "Cleaning and care").
Remove any protective foil from the
front of the machine.
Switching on
^ Touch the On/Off sensor s to switch
on the machine.
When the machine is switched on for
the first few times with the master
switch, a welcome screen and some
other messages will appear briefly. The
welcome screen will be displayed each
time the machine is switched on until 5
drinks have been prepared.
Míele
Willkommen
Using the coffee machine - first steps
16