Filter
Top Products
Ventilation
Ensure that the back of the coffee
machine is sufficiently ventilated, so
that steam and warm air can dissipate
freely.
The ventilation gaps in the furniture
housing unit and the gap between
the top of the housing unit and the
ceiling must be at least 200 cm².
Otherwise condensation can build up
and damage the machine or the
housing unit.
Installation
Before installation make sure that
there is no power supply to the
machine. This also applies should it
ever need to be taken out of its
housing unit.
The machine may only be used
when it has been built in. It can only
be used in areas with an ambient
temperature of +15 °C to +60 °C.
You will need two Allen keys (size 3
and 5) for installing the machine.
To align the machine front with the
furniture front ensure that there is a
sealing strip provided all the way
around the building-in niche or around
the coffee machine.
^
If the housing unit niche is not fitted
with a sealing strip you should fit a
Miele sealing strip to the machine
before installing it. This is fitted from
the back of the machine.
This sealing strip is available to order
from Miele.
^ Using the large allen key, unscrew all
four feet out by about 2 mm.
The feet can be unscrewed by up to
approx. 10 mm.
^
Push the machine all the way into the
niche until there is a resistance. Then
check the height to make sure it is
sitting centrally in the unit and that it
is level.
Installation
81