Filter
Top Products
Clean milk pipework of any
blockages
If you are getting steam instead of milk
from the central spout the milk
pipework in the machine is probably
blocked up.
If the milk pipework in the lid is
clogged,
^
use the cleaning brush to clean it
under running water.
Insert the brush into the pipework
and move it back and forth as far as
it will go until all the milk deposits are
removed.
If the milk pipework in the machine is
clogged,
^ Take the lid off the central spout. Pull
the jets out of the central spout.(See
"Central spout").
^ Open the door.
^ Remove the stainless steel milk flask
and clean it, making sure you
thoroughly clean the area around the
lid and neck (see "Stainless steel milk
flask").
^
Release the cover to the milk
pipework by pressing the tabs in on
the left and right hand sides.
^
Take the cover off together with the
milk pipework. Clean the whole
component in the dishwasher without
dismantling it.
If there is still residual milk in the
pipework after this, use the cleaning
brush supplied to remove it. To do so,
dismantle the cover and the milk
pipework as follows:
Do not take the milk pipework out of
its holder. This could cause the
pipes to leak.
^
Press down on the small recess in
the spout's holder (a) and pull the
holder forwards and out (b). Loosen
the milk pipework from its guides.
Cleaning and care
53