Filter
Top Products
Setting the volume (keypad
tone, buzzer)
You can choose for a tone to sound
each time a sensor is touched. The
volume of the tone can also be
adjusted:
^
Select "Settings F" from the Main
menu, and then touch the OK sensor.
Settings
Volume
Plate warmer
^
Touch the right arrow sensor until
"Volume" is highlighted, and then
touch the OK sensor.
^ Touch one of the arrow sensors to
select "Buzzer tones" or "Keypad
tone" and touch the OK sensor.
^ Touch one of the arrow sensors to set
the volume quieter or louder.
If you continue towards the left until
none of the small white bars is showing,
the tone will be switched off.
^
Touch the OK sensor to save the
setting.
Activating the plate warmer
You can connect a Miele EGW 4000-14,
-29 or an EGW 5000-14 to the coffee
machine using a special connection
cable available as an optional
accessory from your Miele Dealer or the
Miele Spare Parts Department.
Once the plate warmer is connected,
you will need to "install" the plate
warmer in the "Settings" menu.
^
Select "Settings F" from the Main
menu, and then touch the OK sensor.
Settings
Plate warmer
Plumbed water supply
^ Touch the right arrow sensor until
"Plate warmer" is highlighted and
touch the OK sensor.
There are three options:
Automatic
The plate warmer will switch on and off
together with the coffee machine. The
plate warmer must be switched on with
the On/Off control.
If you have programmed the coffee
machine to switch on at a specific time,
the plate warmer will always switch on
approx. 30 minutes before the coffee
machine is due to switch on so that
your cups are warmed up ready for
your coffee.
Settings: Customising your machine
39