Filter
Top Products
The steam valve must engage in the
lower position in order to connect
properly with the cappuccinatore.
^
When you have enough froth in the
cup push the steam valve upwards
again.
Preparing cappuccino
^
Dispense milk froth into the cup, as
described above.
^
Use the drink selection sensor to
select Espresso.
^ Touch the OK sensor once.
The espresso will be dispensed from
the coffee spout, and your cappuccino
is ready.
You can also prepare milk froth and
espresso at the same time. Making it
at the same time will, however, leave
the cappuccino looking a bit brown.
It is also harder to get the ratio of
coffee to milk right.
You can only make coffee and froth
at the same time if the steam system
is set up for this. See "Settings:
customising your machine - Setting
the Steam system").
Frothing milk in the cappuccinatore
^
Pull the spout out of the lid as far as it
will go.
^
Turn the valve on the cappuccinatore
clockwise as far as it will go.
^
Fill the cappuccinatore up to the
lower marker with cold milk and
replace the lid.
^
Place the cappuccinatore in the
insert in the drip tray.
^ Press down the steam valve a slowly
and carefully to connect it to the
cappuccinatore b.
The steam valve must engage in the
lower position in order to connect
properly with the cappuccinatore.
^
When you have sufficient froth push
the steam valve upwards again.
Making drinks
20