Filter
Top Products
It can also be combined with other
Miele built-in appliances. If the coffee
machine is to be built in above another
appliance, there must be a full-width,
closed shelf between the appliances
(except when it is combined with a
Miele system drawer).
The machine can also be installed in a
mobile unit which is available to
purchase.
Installation
Before installation make sure that
there is no power supply to the
machine. This also applies should it
ever need to be taken out of its
housing unit.
The machine may only be used
when it has been built in. It can only
be used in areas with an ambient
temperature of +15 °C to +60 °C.
You will need two Allen keys (size 3
and 5) for installing the machine.
^
Push the machine all the way into the
niche until there is a resistance. Then
check the height to make sure it is
sitting centrally in the unit and that it
is level.
If this is not the case, realign the 4
feet underneath the machine using
the large allen key.
The feet can be unscrewed by up to
approx. 10 mm.
^ If the furniture unit walls are 19 mm
thick you will need to drill four holes
in the sides for securing the machine.
To mark the position of these holes:
–
Align the machine in the niche.
Screw the side socket screws inside
the machine in a little so that they
make indents in the side walls, and
then unscrew them again.
–
Take the machine out of the niche
and drill ø 4.5 mm holes, 2 mm deep
where you made the indentations.
Installation
67