Filter
Top Products
. . . "Fault -76" appears in the display.
The coffee capsule was not pushed
onto the capsule plate correctly and
could have been damaged.
^
Open the front of the machine.
Press the master switch in the
machine at the top left to
disconnect it from the mains.
^
Pull the carousel runners out of the
machine.
^ There is an opening to the right of the
slot for the capsule plate. Check if a
coffee capsule has become stuck
there.
^
Push the coffee capsule with your
finger back into the waste container.
^
Switch the machine on again with the
master switch.
^
Close the machine front and follow the
instructions given in the right hand
display.
The coffee capsule is not visible on the
capsule plate because a capsule has
become stuck in the brew unit.
^
Open the front of the machine.
Press the master switch in the
machine at the top left to
disconnect it from the mains.
^
Remove the carousel runners and the
capsule plate from the machine.
^ Try to remove the coffee capsule
from the upper area of the brew unit.
Only use a wooden spoon handle or
similar to do this.
^ Fit the capsule plate, carousel
runners and the capsule carousel
back into the machine.
^
Switch the machine on again with the
master switch.
^
Close the machine front and follow the
instructions given in the display.
If the fault indicator appears in the
display again, contact the Miele Service
Dept.
Problem solving guide
62