Miele DA 3590 EXT Cooktop User Manual


 
Con|ctivity
This cooker hood is communication
enabled.
Communication module XKM 2000 DA
a, available as an optional extra,
enables the operation of the cooker
hood to be automatically controlled by
the operating status of a Miele electric
hob with onset controls.
For communication to take place, the
hob must be fitted with communication
module XKM 2000 KM b.
The hob transmits information about its
operating status to the cooker hood via
the household power supply
(Powerline) c.
The communication module is fitted to
the housing of the cooker hood and is
connected to the controls of the cooker
hood.
The module must be installed by a
Miele service technician or suitably
qualified electrician.
Automatic operation
^
With the deflector plate pushed in on
the cooker hood, switch on the hob.
The hob lighting will switch on
automatically.
^
Then pull the deflector plate out. The
cooker hood fan will switch on.
During cooking, the cooker hood
automatically sets its power level
according to the number of cooking
zones in operation and their power
levels. You can still operate the cooker
hood manually at any time.
After the hob has been switched off, the
cooker hood fan and hob lighting will
switch off automatically after a period of
time.
If the deflector plate remains pulled out,
the cooker hood will switch on
automatically the next time the hob is
switched on.
Manual operation
^
If you want to operate the cooker
hood manually, pull the cooker hood
deflector plate out before switching
on the hob.
Proceed as described in "Operation".
For detailed information about this
function, please read the separate
instruction booklet supplied with the
XKM 2000 DA communication
module.
Miele|home
13