Filter
Top Products
Adjusting the deflector plate
(DA 3560, DA 3590)
When retracted, the deflector plate is
held in place by magnets.
The retaining force of the magnets can
be adjusted.
The magnets should be adjusted so
that the deflector plate is held in place
securely on the left and right hand side
and can be lowered slightly.
An angled key is supplied for adjusting
the magnets.
^
Adjust both sides equally.
Turn in stages by half a turn each
time and check the adjustment by
lowering and raising the deflector
plate.
–
Turning the adjusting screws
clockwise increases the magnetic
retaining force.
–
Turning the adjusting screws
anti-clockwise reduces the magnetic
retaining force.
^
The covers for the brackets are
designed for 16 mm and 19 mm thick
carcase sides. Turn the covers so
that they are in the appropriate
position and fit them onto the
brackets.
Installation
34