Filter
Top Products
Cleaning the grease filters by hand
^
Clean the filters with a soft nylon
brush in a mild solution of hot water
and a little washing-up liquid.
Do not use "neat" washing-up liquid.
Avoid:
–
cleaning agents containing
descaling agents,
–
powder cleaners, cream cleaners or
abrasive all-purpose cleaners.
–
oven sprays.
Cleaning the grease filters in the
dishwasher
^ Place the filters as upright as
possible in the lower basket, with the
short sides upright. Make sure that
the spray arm can move freely.
^ Select a programme with a maximum
temperature of 65° C. If a Miele
dishwasher is being used, select the
Sensor wash programme.
^
Use a mild dishwasher detergent.
Depending on the dishwasher
detergent used, cleaning the filters
in a dishwasher can cause
permanent discolouration to the
surface.
However, this will not affect the
functioning of the filters in any way.
^
After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
^
When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
^
Push the grease filters back into
position.
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
^
Whilst the fan is switched on, press
the operating hours button [ for
approx. 3 seconds until only the 1 is
flashing.
The Grease filter symbol [ goes out.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum:
^ Press the operating hours button [
for approx. 6 seconds until only the 1
is flashing.
Cleaning and care
20