Filter
Top Products
When fitting the DA 3590 in a 900 mm
wide housing unit, the retaining
brackets supplied are used to align the
cooker hood and provide additional
support.
The retaining brackets are secured
either to the top or the back panel of
the wall unit.
If the wall unit does not have a solid
back panel, the cooker hood can be
secured directly to the wall using the
screws and plugs supplied.
The top housing screws are used to
secure the retaining brackets to the
cooker hood.
If the screws are difficult to access use
the angled key supplied to tighten
them.
^ Unscrew the appropriate housing
screws.
^
Attach the retaining brackets loosely
to the housing with the screws.
^
Align the cooker hood and mark the
position of the fixing holes in the wall
unit.
^
Now secure the brackets to the wall
unit.
^
Realign the cooker hood and tighten
up the screws on the housing unit.
^
Use the adhesive covers supplied to
conceal the fixing holes which are not
required.
Installation
33