Filter
Top Products
^ Attach the vent ducting to the
exhaust socket, using e.g. a flexible
hose and clips (available as an
optional accessory).
When using C 125 mm ducting, fit
the reducing collar supplied into the
exhaust socket. (See "Connection for
air extraction").
^
Place the vent ducting onto the
exhaust socket on the cooker hood.
^
See "Connection for air extraction" for
further instructions on fitting the
ducting.
Setting up for recirculation
mode
If site conditions are not suitable for the
cooker hood to be used with air
extraction, the appliance must be set
up for recirculation.
A conversion kit, available through your
dealer or from Miele is required for
operating the cooker hood in
recirculation mode.
You will also need two charcoal filters
(see "Technical data").
Conversion kit DUU 150 with a plastic
grille is suitable for fitting in a
non-visible area of the top of the wall
unit.
Conversion kit DUU 151 with a stainless
steel grille is recommended if the grille
is to be fitted in an area which is visible.
Installation
36
dai2699