Filter
Top Products
To switch the fan on
^
Pull the deflector plate downwards
slightly and then towards you.
The fan will come on at power level 2.
The On/Off symbol K and Fan setting 2
will light up.
To select a power level
^ Press the – symbol to select a lower
power level or the + symbol to select
a higher power level.
Depending on the intensity of the
cooking vapours, levels 1 to 3 are
usually sufficient for normal cooking.
Intensive setting
^
For short periods of strong vapours
and cooking odours, e.g. whilst
searing meat, select the IS or
Intensive setting.
Pull the deflector plate out to its full
extent to gain maximum extraction
whilst avoiding excessive noise
levels.
Automatic switch-off of the Intensive
setting
You can set the Intensive setting so that
it always only runs for 10 minutes
before reverting automatically to level 3.
^
Pull the deflector plate out and switch
off the fan K and the lighting I.
^
Press the Run-on option button
5 ¢15 for approx. 10 seconds, until
the 1 lights up.
^
Then press in turn –
– the lighting button I,
– the – button, and
– the lighting button I again.
If Automatic switch-off is not activated,
1 and IS will flash.
^ Press the + button to activate Auto-
matic switch-off.
Fan power levels 1 and IS will now
light up constantly.
Press the – button to deactivate the
Automatic switch-off function.
^
Confirm your selection by pressing
the Run-on option button 5 ¢15.
If you do not confirm within 4 minutes,
the cooker hood will automatically
revert to the original setting.
Operation
14