Filter
Top Products
^
Screw the brackets onto the right and
left inside walls of the housing unit so
that they are flush with the bottom
edge of the wall unit.
The brackets are designed for
16 and 19 mm thick carcase sides.
Orientate the bracket so that the
vertical depth matches the thickness
of the carcase side, as shown.
^
Fit the screws for attaching the
cooker hood so that they protrude by
about 5 mm, as shown.
Only use the front screws when fitting a
900 mm wide cooker hood in a 600 mm
wide wall unit.
Installation
31